Static Eliminators 11510 Goldcoast Drive • Cincinnati, OH 45249-1621 • Phone (513) 671-3322 FAX (513) 671-3363 • E-mail: [email protected] • www.exair.com 125 Electrical Hazard: Gen4 Ionizing Bars are shockless (less than 40 microamperes short circuited). Do not use near flammable materials or gases. Materials of Construction Metal Parts: Aluminum Plastic Parts: UL rated 94 HB Emitters: Stainless Steel Maximum Ambient Temperature: 165°F (74°C) Shims: Thicker shims can be installed easily if additional hard-hitting velocity is required. For more information, see "shim sets" on on page 25. Super Ion Air Knife Specifications The Gen4 Super Ion Air Knife is available in standard lengths of 3", 6", 9", 12", 18", 24", 30", 36", 42", 48", 54", 60", 72", 84", 96" and 108" (76, 152, 229, 305, 457, 610, 762, 914, 1067, 1219, 1372, 1524, 1829, 2134, 2438 and 2743mm). Special lengths and unlimited system lengths are available (please contact our factory). A 5' (1.52m) armored and electromagnetically shielded power cable with ground and assembled bayonet connector are included. EXAIR Model 7960 or 7961 Gen4 Power Supply (5kV) is required for Super Ion Air Knife operation. Power supplies are equipped with a modular 6' (1.83m) power cord, lighted power switch integrated fuse on the primary and (2) or (4) high voltage outlets. Certifications: Gen4 Ionizing Bars and Gen4 Power Supplies are UL Component Recognized to U.S. and Canadian safety standards, and are CE, EMC and RoHS compliant. Compressed Air: 1/4 NPT inlets are provided on each end and the bottom. Electrical: For use with Model 7960 or 7961 5 kVrms, 5 milliamperes (max.) power supply. Super Ion Air Knife Model 9060 Universal Air Knife Mounting System provides secure, precise positioning for the Gen4 Super Ion Air Knife. See page 29 for details. Static Meter Static Meter Locate the source of the static problem! Digital Static Meter Locates The Source! The Model 7905 Digital Static Meter allows easy one- hand static measurements. In most cases, the highest voltage reading will indicate the source of the static problem. Sensitive and responsive, it indicates the surface voltage and polarity on objects up to ±20 kV when measured one inch (25mm) away. The Digital Static Meter features a push button “hold” for readings, a low battery indicator and an automatic “power off”. A “zero” button to zero the instrument ensures an accuracy of ±5% of the reading when it is one inch (25mm) from the charged surface. The Model 7905 Digital Static Meter comes complete with a hard-shell plastic case and a 9 volt battery. Certification of the accuracy and calibration traceable to NIST (National Institute of Standards and Technology) is also included. Calibration is available.
