@EXAIR For Technical Assistance, Call An EXAIR Application Engineer 1-800-903-9247 Toll Free FAX (866) 329-3924 • E-mail: [email protected] • www.exair.com 40 Air Wipes Super Air Wipe Air Wipe Dimensions Super Air Wipe Specifications The Super Air Wipe is available with throat diameters (I.D.) of 3/8", 1/2", 1", 2", 3", 4", 5", 6", 7", 9", and 11" (10, 13, 25, 51, 76, 102, 127, 152, 178, 229, and 279mm). Special diameters are available. Please contact our factory. Compressed Air Inlets: The Super Air Wipe has compressed air inlets on each half. Stainless steel wire braided hose is supplied with sizes up to 4" (102mm) that couples the air supply of one half to the other. Sizes 9" (229mm) and larger have two inlets on each half that must be supplied with compressed air to maintain uniform airflow. Filtration: The use of clean air is essential. Kits include an automatic drain filter separator with a 5 micron filter element that is sized properly for flow. Materials of Construction: The Super Air Wipe is constructed of aluminum or stainless steel. All models use stainless steel shims and screws. Stainless steel wire braided hose is included with sizes up to 4" (102mm). Temperature: Aluminum Super Air Wipes are rated for temperatures up to 400°F (204°C). Stainless steel models are rated for temperatures to 800°F (427°C). Mounting: The Super Air Wipe can be supported by the compressed air supply pipe. Tapped holes (1/4-20) on the downstream side of the Super Air Wipe can also be used for mounting. Regulation: A pressure regulator on the compressed air supply provides infinite control of flow, force and air consumption. Kits include a pressure regulator that is sized properly for flow. Shim Sets: The Super Air Wipe has a .002" (0.05mm) gap setting. The compressed air exhausts through a gap which is set with a stainless steel shim positioned between the cap and body of the Super Air Wipe. Force and flow through the Super Air Wipe may be easily increased by adding shims to open the gap. Kits include a shim set. Shim sets include (2) .002" (0.05mm) thick stainless steel shims. The Super Air Wipe eliminates the possibility of smoke during machining by wiping hydraulic oil from the bar stock as it enters the chuck. Air Wipe Performance 80 PSIG (5.5 BAR) Air Consumption Sound Level @3' (914mm) Model # SCFM SLPM dBA 2399, 2429 11.1 314 82 2400, 2400SS, 2430 13.9 394 80 2401, 2401SS, 2431 19.1 541 80 2402, 2402SS, 2432 29.5 835 81 2403, 2403SS, 2433 39.8 1,127 82 2404, 2404SS, 2434 50.2 1,422 82 2405, 2435 60.6 1,716 82 2406, 2436 71.0 2,010 84 2407, 2437 81.3 2,302 85 2409, 2439 102.1 2,891 87 2411, 2441 122.8 3,477 89 Super Std A B C D 2399 2429 in 3.13 1.13 0.38 2.38 mm 79 29 10 60 2400, 2400SS 2430 in 3.25 1.13 0.50 2.50 mm 83 29 13 64 2401, 2401SS 2431 in 3.75 1.13 1 2.95 mm 95 29 25 75 2402, 2402SS 2432 in 4.75 1.13 2 3.95 mm 121 29 51 100 2403, 2403SS 2433 in 5.75 1.13 3 4.95 mm 146 29 76 126 2404, 2404SS 2434 in 6.75 1.13 4 5.95 mm 172 29 102 151 2405 2435 in 7.75 1.13 5 6.95 mm 197 29 127 176 2406 2436 in 8.75 1.13 6 7.95 mm 222 29 152 202 2407 2437 in 9.75 1.13 7 8.95 mm 248 29 178 227 2409 2439 in 11.75 1.13 9 10.95 mm 299 29 229 278 2411 2441 in 13.75 1.13 11 12.95 mm 349 29 279 329
