Industrial Housekeeping @EXAIR For Technical Assistance, Call An EXAIR Application Engineer 1-800-903-9247 Toll Free FAX (866) 329-3924 • E-mail: [email protected] • www.exair.com 186 Industrial Housekeeping Chip Trapper Systems Model # Description 6198 55 Gallon Chip Trapper System includes the Reversible Drum Vac pump assembly, directional flow valve, 55 gallon drum, lever lock drum lid, shutoff valve, 10' (3m) flexible vacuum hose (1-1/2"/38mm I.D.), 20' (6.1m) compressed air hose, chip wand, (2) filter bags and drum dolly. 6198-30 30 Gallon Chip Trapper System - same as Model 6198 except includes a 30 gallon drum 6198-110 110 Gallon Chip Trapper - same as Model 6198 except includes a 110 gallon drum. 6091 Reversible Drum Vac Only - included in all systems listed above. Accessories Model # Description Model # Description 901060-1 Replacement Filter Bag, 1 micron 901060-200 Replacement Filter Bag, 200 micron 901060 Replacement Filter Bag, 5 micron 901060-SP Filter Bag Sample Pack- Includes one each 1, 25, 50, 100 & 200 micron bags 901060-25 Replacement Filter Bag, 25 micron 6901 Spill Recovery Kit includes a one-piece 54" (1372mm) ABS wand and 14" (356mm) double blade squeegee tool 901060-50 Replacement Filter Bag, 50 micron 901060-100 Replacement Filter Bag, 100 micron 9001 Auto Drain Filter Separator, 3/8 NPT, 65 SCFM (1,841 SLPM) How The Chip Trapper Works The vacuum hose (1) is attached to the barbed connection of the Chip Trapper (2). The directional flow control valve on top of the drum (3) and knob on the pump (4) are set to the “fill” position. The air supply valve is opened to permit compressed air at 80-100 PSIG (5.5 – 6.9 BAR) to flow through the pump which pulls the liquid through the hose, then into the reusable filter bag (5). When all liquid is in the drum, the air supply is automatically turned off. The filtered liquid can then be pumped out by setting the directional flow control valve on top of the drum and the knob on the pump to the “empty” position. Once the air supply valve is opened, the air pushes the liquid back through the hose while all solids remain in the reusable filter bag. Chip Trapper Warning: Do not use with any material with a low flash point or with flammable liquids such as fuel oil, alcohol, mineral spirits, gasoline or kerosene. Built To Last The stainless steel pump has no motors or impellers to clog or wear out and there is no electricity or shock hazard! Safe operation is assured with a built-in pressure/vacuum relief and an automatic safety shutoff valve that prevents spills or overfilling. Chip Trapper System Specifications Pressure Supply 80 PSIG (5.5 BAR) Air Consumption Water Flow Rate Sound Level DESCRIPTION SCFM SLPM GPM LPM 86 dBA CHIP TRAPPER 19 538 30 114 The filter bag included with the system provides 5 micron filtration. The Chip Trapper includes the pump assembly with directional flow valve, a 30, 55 or 110 gallon drum, 10' (3m) chemical resistant hose, 20' (6.1m) compressed air hose, aluminum chip wand, (2) reusable 5 micron filter bags and drum dolly. See page 4 for complete details. The 5 micron filter bag traps all the chips so no solids get pumped back out of the drum.
