Industrial Housekeeping @EXAIR For Technical Assistance, Call An EXAIR Application Engineer 1-800-903-9247 Toll Free FAX (866) 329-3924 • E-mail: [email protected] • www.exair.com 188 Industrial Housekeeping High Lift Chip Trapper Systems Model # Description 6190 55 Gallon High Lift Chip Trapper System includes the High Lift Reversible Drum Vac pump assembly, directional flow valve, 55 gallon drum, lever lock drum lid, shutoff valve, 20' (6.1m) flexible vacuum hose (1-1/2"/38mm I.D.), 20' (6.1m) compressed air hose, chip wand, (2) filter bags and drum dolly. 6190-30 30 Gallon High Lift Chip Trapper System - same as Model 6190 except includes a 30 gallon drum. 6190-110 110 Gallon High Lift Chip Trapper - same as Model 6190 except includes a 110 gallon drum. 6095 High Lift Reversible Drum Vac Only- Included in all systems listed above. Accessories Model # Description Model # Description 901060-1 Replacement Filter Bag, 1 micron 901060-200 Replacement Filter Bag, 200 micron 901060 Replacement Filter Bag, 5 micron 901060-SP Filter Bag Sample Pack- Includes one each 1, 25, 50, 100 & 200 micron bags 901060-25 Replacement Filter Bag, 25 micron 6901 Spill Recovery Kit includes a one-piece 54" (1372mm) ABS wand and 14" (356mm) double blade squeegee tool 901060-50 Replacement Filter Bag, 50 micron 901060-100 Replacement Filter Bag, 100 micron 9001 Auto Drain Filter Separator, 3/8 NPT, 65 SCFM (1,841 SLPM) How The High Lift Chip Trapper Works The vacuum hose (1) is attached to the barbed connection of the High Lift Chip Trapper (2). The directional flow control valve on top of the drum (3) and knob on the pump (4) are set to the “fill” position. The air supply valve is opened to permit compressed air at 80-100 PSIG (5.5 – 6.9 BAR) to flow through the pump which pulls the liquid through the hose, then into the reusable filter bag (5). When all liquid is in the drum, the air supply is turned off. The filtered liquid can then be pumped out by setting the directional flow control valve on top of the drum and the knob on the pump to the “empty” position. Once the air supply valve is opened, the air pushes the liquid back through the hose while all solids remain in the reusable filter bag. High Lift Chip Trapper The High Lift Chip Trapper includes the pump assembly with directional flow valve, a 30, 55 or 110 gallon drum, 20' (6.1m) chemical resistant hose, 20' (6.1m) compressed air hose, aluminum chip wand, (2) reusable 5 micron filter bags and drum dolly. Warning: Do not use with any material with a low flash point or with flammable liquids such as fuel oil, alcohol, mineral spirits, gasoline or kerosene. See page 4 for complete details. Built To Last The stainless steel pump has no motors or impellers to clog or wear out and there is no electricity or shock hazard! Safe operation is assured with a built-in pressure/vacuum relief and an automatic safety shutoff valve that prevents spills or overfilling. High Lift Chip Trapper System Specifications Pressure Supply 80 PSIG (5.5 BAR) Air Consumption Lift Water Flow Rate Sound Level DESCRIPTION SCFM SLPM "H2O mm Hg GPM LPM 83 dBA HIGH LIFT CHIP TRAPPER 43 1,218 180 336 30 114 The 5 micron filter bag traps all the chips so no solids get pumped back out of the drum.
