11510 Goldcoast Drive • Cincinnati, OH 45249-1621 • Phone (513) 671-3322 FAX (513) 671-3363 • E-mail: [email protected] • www.exair.com 209 Vortex Tubes & Spot Cooling Model 3825 Adjustable Spot Cooler System includes the Adjustable Spot Cooler, single point hose kit with cone and fan nozzle, swivel magnetic base, filter separator, 15 and 30 SCFM (425 and 850 SLPM) generators. (25 SCFM/708 SLPM generator installed.) Accessories and Components Model # Description 5901 Single Point Hose Kit (Included with 3825) 5902 Dual Point Hose Kit (Included with 3925) 9004 Auto Drain Filter Separator, 1/4 NPT, 43 SCFM (1,359 SLPM) (Included with 3825 and 3925) 9005 Oil Removal Filter, 3/8 NPT, 15 - 37 SCFM (425 - 1,048 SLPM) 9012 Manual Shutoff Valve, 1/4 NPT 9020 Solenoid Valve, 120V, 50/60Hz, 1/4 NPT, 40 SCFM (1,133 SLPM) Adjustable Spot Cooler Systems Model 3925 Adjustable Spot Cooler System includes the Adjustable Spot Cooler, dual point hose kit with cone and fan nozzles, swivel magnetic base, filter separator, 15 and 30 SCFM (425 and 850 SLPM) generators. (25 SCFM/708 SLPM generator installed.) (Adjustable Spot Cooler with dual point hose kit is recommended when heat is generated over a larger surface area.) The Problem: A manufacturer of electrical heat tapes had a problem testing thermostats for accuracy. The heat tape is supposed to switch on when the outdoor temperature dips below 40°F to prevent pipes from freezing or ice from building up on a roof’s edge. The liquid-tight thermostat of every tape had to be dipped into a bowl of ice water (thermometer checked at 36°F (2°C)) to make sure the indicator light Testing Heat Tape Thermostats came on and the tape got warm. Summertime heat caused the water to heat up so quickly that more time was spent regulating the water temperature than testing thermostats. The Solution: The water bath was replaced with a Model 3825 Adjustable Spot Cooler. Once set to their desired temperature of 36°F (2°C), it provided a stable temperature all day long without adjustment. Drying each heat tape was no longer required and testing was over in seconds. Comment: The Adjustable Spot Cooler paid for itself in no time as a result of the increased productivity. In this case, the company used the included 15 SCFM (425 SLPM) generator which minimized the compressed air use, costing only 23 cents per hour of continuous use! When testing thermostats, cooling machined plastics, setting hot melts or controlling tolerances, the Adjustable Spot Cooler is the best choice. Adjustable Spot Cooler Order EXAIR’s EFC™ electronic flow control to minimize compressed air use. See page 7 for details.