Standard Ion Air Knife Static Eliminators Note: Performance on lengths over 36" will vary. EXAIR_Cat36_25_FROMINDESIGN.indb 139 12/20/24 3:47 PM 139 EXAIR_Cat36_25_FROMINDESIGN.indb 139 12/20/24 3:47 PM Standard Ion Air Knife Performance Pressure Supply Air Consumption* Sound Level Dissipates 5kV** PSIG BAR SCFM SLPM dBA SECONDS 5 0.3 6 170 66 0.38 10 0.7 8 227 68 0.28 20 1.4 16 453 69 0.29 40 2.8 24 679 78 0.21 60 4.1 32 906 84 0.21 80 5.5 41 1,160 87 0.21 100 6.9 49 1,387 90 0.21 * per foot (305mm) of length ** 6" (152mm) from target. For airflow pattern, see Standard Air Knife page 35. Contact an Application Engineer for details. Kits include the Gen4 Standard Ion Air Knife, shim set, Model 7960 Gen4 Power Supply, filter separator and pressure regulator (with coupler). Standard Ion Air Knife Models Standard Ion Air Knife Specifications Te Gen4 Standard Ion Air Knife is available in standard lengths of 3", 6", 9", 12", 18", 24", 30", 36", 42" and 48" (76, 152, 229, 305, 457, 610, 762, 914, 1067 and 1219mm). Special lengths up to 48" (1219mm) and unlimited system lengths are available (please contact our factory). A 5' (1.52m) armored and shielded power cable with ground and assembled bayonet connector are included. EXAIR Model 7960 or 7961 Gen4 Power Supply (5kV) is required for Standard Ion Air Knife operation. See page 151 for details. Certifications: Gen4 Ionizing Bars and Gen4 Power Supplies are UL Component Recognized to U.S. and Canadian safety standards, and are CE and RoHS compliant. Compressed Air: 1/4 NPT inlets are provided on each end. Electrical: For use with 5 kVrms, 5 milliamperes (max.) power supply. Electrical Hazard: Gen4 Ionizing Bars are shockless (less than 40 microamperes short circuited). Do not use near flammable materials or gases. Materials of Construction Metal Parts: Aluminum Plastic Parts: UL rated 94 HB Emitters: Stainless Steel Maximum Ambient Temperature: 165°F (74°C) Shims: Ticker shims can be installed easily if additional hard-hitting velocity is required, see “shim sets” page 34. Gen4 Standard Ion Air Knife - consists of the Standard Air Knife and Gen4 Ionizing Bar assembly. Does not include Power Supply. Gen4 Standard Ion Air Knife Systems - include a Gen4 Standard Ion Air Knife and Model 7960 Gen4 Power Supply (115V, 230V, 50/60Hz). Gen4 Standard Ion Air Knife Kits - include a Gen4 Standard Ion Air Knife, Model 7960 Gen4 Power Supply, shim set, filter separator and pressure regulator (with coupler). Gen4 Deluxe Standard Ion Air Knife Kits - include a Gen4 Standard Ion Air Knife, EFC, Universal Mounting System, Model 7960 Gen4 Power Supply, shim set, filter separator and pressure regulator (with coupler). Length Gen4 Standard Ion Air Knife Model Gen4 Standard Ion Air Knife Systems Model Gen4 Standard Ion Air Knife Kits Model Gen4 Deluxe Standard Ion Air Knife Kits Model 3" (76mm) 8103 8203 8403 8403DX 6" (152mm) 8106 8206 8406 8406DX 9" (229mm) 8109 8209 8409 8409DX 12" (305mm) 8112 8212 8412 8412DX 18" (457mm) 8118 8218 8418 8418DX 24" (610mm) 8124 8224 8424 8424DX 30" (762mm) 8130 8230 8430 8430DX 36" (914mm) 8136 8236 8436 8436DX 42" (1067mm) 8142 8242 8442 8442DX 48" (1219mm) 8148 8248 8448 8448DX Special length Gen4 Standard Ion Air Knives and unlimited system lengths are available. Please contact our factory. Universal Air Knife Mounting System See page 29 for details. EXAIR’s Universal Air Knife Mounting System allows easy positioning of all EXAIR Air Knives. Order EXAIR’s EFC™ electronic flow control to minimize compressed air use. See page 7 for details. 11510 Goldcoast Drive • Cincinnati, OH 45249-1621 • Phone (513) 671-3322 FAX (513) 671-3363 • E-mail: [email protected] • www.exair.com
